OVERVIEW

GebraBit ADS1194 is 5 lead, 4 simultaneous channel sampling, 16 Bit ECG sensor Module.

GebraBit ADS1194 needs 2 voltages for both analog and digital supply of ADS1194. As a result, 2 jumper selector is considered to user select desired supply voltage among 1V8, 3V3, and 5V.

GebraBit ADS1194 offers 2 choices for ADS1194 clock source ; one is ADS1194  Internal oscillator and the other, external, means on board 2.048Mhz crystal oscillator or ‘CLK’ pin. This is achieved by the ‘CLK SEL’ jumper selector. Also ‘EXT  CLK’ jumper demonstrates an external clock source, whether the ‘CLK’ pin or 2.048Mhz  Onboard crystal oscillator.

GebraBit ADS1194 module benefits from all 4 channels of ADS1194 sensor due to considered TYPE-C female socket. This means a custom-built 5-lead ECG cable is provided to cover this requirement.

Another important issue of  GebraBit ADS1194  is that, although this module is Pin Compatible with GEBRABUS , but also two extra pins is added to the top of each right and left module pins for accessing all important I/O of ADS1194. For reading data and configuring the sensor, an SPI interface is required.

This Module carries ADS1194, which is family of multichannel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator.The ADS1194/6/8 have a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and lead-off detection. Additionally, any configuration of input channels can be selected for derivation of the right leg drive (RLD) output signal. The ADS1194/6/8 operate at data rates as high as 8kSPS, thereby allowing the implementation of software pace detection.Three integrated amplifiers generate the Wilson Center Terminal (WCT) and the Goldberger terminals (GCT) required for a standard 12-lead medical electrocardiogram (ECG).

WARNING: FOR ACCURATE INFORMATION ABOUT ICs ABSOLUTE MAXIMUM RATINGS AND ITS PRECIOUS  CHARACTERISTICS RANGES, USERS MUST CERTAINLY REFER TO ICs MANUFACTURE DATASHEET.

Key Features

• User selectable analog and digital supply voltage
• User selectable ADS1194 clock source (Internal or external )
• 048 Mhz  crystal oscillator
• Benefits from all 4 channels of ADS1194
• Custom-built TYPE-C 5 lead ECG cable  
• ON/OFF LED indicator
• Access to important I/O of ADS1194
• SPI interface for reading data and configuring the sensor
• Pin Compatible with GEBRABUS
• GebraBit Large package
• It can be used as a daughter board of GEBRABIT MCU Modules
• Featuring Castellated pad (Assembled as SMD Part)
• Separatable screw parts to reduce the size of the board

Pinout Diagram

Module Overview

Documents Link