GebraBit

GebraBit ICM20689 MEMS Motion Tracking Module Overview

متن سربرگ خود را وارد کنید

BLOG

GebraBit ICM20689 MEMS Motion Tracking Module Overview

  1. Home
  2. »
  3. Blog
  4. »
  5. GebraBit ICM20689 MEMS Motion Tracking Module Overview

Motion tracking assists in tracking the movement of objects and transferring the sensed data to an application for further processing. Motion tracking includes capturing the motions of objects matching with its stored motion template. This has a wide range of applications such as in military, entertainment, sports, medical applications, validation of computer vision and robotics. Furthermore, it is also used in film making and in video game development. In many areas, motion tracking is often called motion capture, whereas in film making and games, motion tracking is commonly called match moving.

Motion tracking sensors

The Gyroscope measures angular velocity using the Coriolis Effect. When a mass moves in a certain direction with a certain speed and an external angular rate is applied as shown in the green arrow below, a force such as the red-blue arrow shown, causes the mass to move vertically.

So, similar to the accelerometer, this displacement causes a change in capacitance that is associated with a specific angular rate.

Gyroscope

The structure of the micro-Gyroscope is something like this. A mass that is constantly moving or oscillating and when an external angular rate is applied, the flexible part of the mass moves and undergoes vertical displacement.

An accelerometer is a device that measures the vibration, or acceleration of motion of a structure. The force caused by vibration or a change in motion (acceleration) causes the mass to “squeeze” the piezoelectric material which produces an electrical charge that is proportional to the force exerted upon it. Since the charge is proportional to the force, and the mass is a constant, then the charge is also proportional to the acceleration. These sensors are used in a variety of ways from space stations to handheld devices, and there’s a good chance you already own a device with an accelerometer in it. For example, almost all smartphones today house an accelerometer. They help the phone know whether it undergoes acceleration in any direction, and it’s the reason why your phone’s display switches on when you flip it. In an industry setting, accelerometers help engineers understand a machine’s stability and enable them to monitor for any unwanted forces/vibrations.

 

An accelerometer works using an electromechanical sensor that is designed to measure either static or dynamic acceleration. Static acceleration is the constant force acting on a body, like gravity or friction. These forces are predictable and uniform to a large extend. For example, the acceleration due to gravity is constant at 9.8m/s, and the gravitation force is almost the same at every point on earth.

The theory behind accelerometers is that they can detect acceleration and convert it into measurable quantities like electrical signals.

An overview of the ICM20689

ICM20689 Sensor

The ICM20689 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor  (DMP) in a small 4×4×0.9mm (24-pin QFN) package.

The ICM-20689 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, programmable interrupts and its Communication ports include
I2C and high speed SPI at 8 MHz.

The other features of this sensor include a programmable gyroscope with FSR ±250dps, ±500dps, ±1000dps, ±2000dps and a programmable accelerometer with FSR ±2g, ±4g, ±8g and ±16g.

Also, the 4K_byte FIFO buffer in this sensor enables the processor to read data consecutively.

This sensor can be used in applications such as mobile phones and tablets, drones, motion-based game controllers, 3D remote control for Internet-connected DTVs and set-top boxes, wearable sensors for health, fitness and sports.

Specification

Applications

• Number of Axis: 6-Axis
• Output type: Digital-I2C or SPI
• Accelerometer FSR: ±2, ±4, ±8, ±16(g)
• Accelerometer Sensitivity SF: 16384, 2048 (LSB/g), 4096, 8192
• Gyroscope FSR: ±250, ±500, ±1000, ±2000(dps)
• Gyroscope Sensitivity SF: 131, 16.4 (LSB/dps), 32.8, 65.5
• Acc. & Gyro ADC: 16 Bit

For more specifications, please refer to the Datasheet

  • Mobile phones and tablets
  • Drones
  • Motion-based game controllers
  • 3D remote controls for Internet connected DTVs and
  • set top boxes, 3D mice
  • Wearable sensors for health, fitness and sports.

GebraBit ICM20689 Module Key Features

  • User-selectable module power supply voltage between 1V8 and 3V3
  • User-selectable module I/O logic voltage between 1V8 and 3V3
  • User-selectable interface protocol (I2C or SPI)
  • User-selectable I2C address (AD0)
  • Access to all data pins of the sensor
  • On Board, ON/OFF LED indicator
  • Pin Compatible with GEBRABUS
  • It can be used as a daughter board of GebraBit MCU Modules
  • Featuring Castellated pad (Assembled as SMD Part)
  • Separatable screw parts to reduce the size of the board
  • Package: GebraBit small (36.29mm x 32.72mm)
  • Schematic (.pdf)

GebraBit ICM20689 module

GebraBit ICM20689

After the explanations mentioned above , due to QFN package and lack of access to sensor pins, you have noticed that, the user needs a starter circuit and driver for the hardware development and of course the software development of the ICM20689 sensor. For the convenience of users, this work has been done by implementing the ICM20689 sensor circuit and providing access to the communication and power supply signal pins, with the ability to select the I2C or SPI communication protocol and the operation voltage and logic level of the communication protocols.

It is enough to put the GebraBit ICM20689 module in the BreadBoard, then by applying the proper voltage and choosing the I2C or SPI communication protocol, set up the GebraBit ICM20689 module with any of Arduino, Raspberry Pi, Discovery board, and especially we recommend using GebraBit microcontroller development modules( GebraBit STM32F303 or GebraBit ATMEGA32 module) then receiving the data.

The reason for our recommendation when setting up the GebraBit ICM20689 module with GebraBit microcontroller development modules (such as GebraBit STM32F303 or GebraBit ATMEGA32), is the presence of an internal 3V3 regulator on these modules and the compatibility of the pin order of all GebraBit modules together (GEBRABUS standard), it’s enough to Put the ICM20689 in the corresponding socket as shown in the above picture and develop the desired sensor module without the need for wiring.

Introduction of module sections

ICM20689 sensor

It’s the main IC of the following module, which is placed in the center of the module and its circuit is designed.

Communication Potocol Selection Jumpers

If the 0R resistors of all Selector Jumpers are to the left side, the I2C protocol is selected. 

If the 0R resistors of all Selector Jumpers are to the right side, the SPI protocol is selected. 

by default,I2C protocol is selected. 

AD0 SEL jumper

If the I2C protocol is selected, the state of AD0 SEL jumper, determines the I2C address of the sensor (0 => 0x68 or  1 =>0x69).

The 0R resistor is set to 0 and the address 0x68 is selected (by default).

VDIO SEL jumper

According to the state of 0R resistance of this jumper, the logic level of digital communication (I2C or SPI) of the sensor is selected between “1V8” and “3V3”.

The digital communication logic level (I2C or SPI) of the sensor is selected 3V3 (by default).

VDD SEL jumper

According to the state of 0R resistance of this jumper, the main voltage of the sensor power supply  is selected between “1V8” and “3V3”.

The main sensor power supply voltage is 3V3 (by default).

power LED

According to the state of the “VDD SEL” jumper and applying voltage to the module by the corresponding pin, the LED of the module will be lit.

GebraBit ICM20689 Module pins

Supply pins

  • 3V3: This pin can supply the sensor main power supply and the logic level of the sensor digital connection (I2C or SPI) according to the state of the “VDD SEL” and “VDIO SEL” selector jumpers.
  • 1V8: This pin can supply the sensor main power supply and the logic level of the sensor digital communication (I2C or SPI) according to the state of the “VDD SEL” and “VDIO SEL” selector jumpers.
  • GND: This is the common ground pin for power and logic level of the sensor.

I2C pins

By using the on-board embedded Jumper selectors, you can choose the type of module communication  . If the 0R resistors of all the Selector Jumpers are to the left side, the ” I2C ” protocol is selected. “AD0 SEL”  jumper status is the I2C address of the sensor (0x68 or 0x69 ).

    • SDA: This pin is the I2C communication data pin, which is connected to the corresponding data pin in the microcontroller (processor). According to the state of the “VDIO SEL” jumper, you can use the logic level with a voltage of “1V8” or “3V3”.This pin is pulled up with a 10K resistor.
    • SCL: This pin is the I2C communication clock pin, which is connected to the corresponding clock pin in the microcontroller (processor). Depending on the state of the “VDIO SEL” jumper, you can use the logic level with a voltage of “1V8” or “3V3”. This pin is pulled up with a 10K resistor.

SPI pins

The type of communication with the module can be selected by using the on-board embedded Selector Jumpers. If the 0R resistors of all the Selector Jumpers are to the right side, the SPI protocol has been selected. The state of the “AD0 SEL” jumper has no effect in this case.

  • SDI (MOSI): This pin is used to send data from the microcontroller (processor) to the module (sensor). The abbreviation of this pin is derived from the Latin phrase Serial Data In / Microcontroller Out Sensor In.
  • SDO (MISO): This pin is used to send data from the module (sensor) to the microcontroller (processor). The abbreviation of this pin is derived from the Latin phrase Serial Data Out / Microcontroller In Sensor Out.
  • SCK: This pin is the clock pin for SPI communication, which is considered as an input for the sensor and is connected to the corresponding clock pin in the microcontroller (processor).
  • CS: This pin is the Chip Select pin for SPI communication with the module (sensor), which is selected by applying LOW voltage (0V), the module (sensor) for SPI communication. This pin is input type for the sensor.

If you want to use several GebraBit ICM20689 modules at the same time, it is enough to connect the SDO, SDI, SCK pins of all modules and the microcontroller (processor) and assign a unique pin to each CS.

Other pins

  • INT: : Interrupt pin for ICM20689 sensor, according to the datasheet , the user can set the interrupt conditions, the modes and methods of the interruption, etc.
  • FSY(FSYNC): This pin is used to synchronize the sensor with an external source. For more information, read the data sheet of the sensor. By default, this pin is connected to the ground with R3 resistor. To use Pin, R3resistor must be removed (disassembly) from the module.

Connect to the processor

I2C connection with GebraBit STM32F303

First, make sure that the I2C protocol is selected by using the on-board jumpers, then for I2C connection of GebraBit ICM20689 and GebraBit STM32F303 microcontroller module, after defining SDA and SCL on pins PB9 and PB8 (for convenience in STMCUBEMX), follow the below steps:

  • Connect the “3V3” pin of the ICM20689 module to the “3V3 “output pin of the microcontroller module. (red wire)
  • Connect the “GND” pin of the ICM20689 module to the “GND” pin of the microcontroller module (black wire).
  • Connect the “SCL” pin of the ICM20689 module to the PB8 pin of the microcontroller (SCL) module (blue wire).
  • Connect the “SDA” pin of the ICM20689 module to the PB9 pin of the microcontroller (SDA) module. (yellow wire)

You can see how to connect the above mentioned steps in this picture:

Note: Considering that the PA14 pin of the GebraBit STM32F303 microcontroller module is used to program the microcontroller, I2C setting on the PA14 and PA15 pins is impossible in this version, so in this version for  I2C  connection with the GebraBit STM32F303 microcontroller module, GebraBit ICM20689 module cannot be placed on it as Pin to Pin. To make a more convenient connection between the two modules, you can select the SPI protocol by using the on-board jumpers and then place the GebraBit ICM20689 module as Pin to Pin on the GebraBit STM32F303 module.   

SPI connection with GebraBit STM32F303

First, make sure that the SPI protocol is selected by using the on-board jumpers, then for connecting GebraBit ICM20689 module to the GebraBit STM32F303 microcontroller module with SPI protocol, after defining SDI, SDO, SCK, and CS on pins PB5, PB4, PB3, and PC13 ( For ease of work in STMCUBEMX) place the GebraBit ICM20689 module Pin to Pin on the GebraBit STM32F303 module easily. Here the separate connection of the modules is shown for better understanding.

SPI or I2C connection with GebraBit ATMEGA32A

Considering that the SPI and I2C pins of the ATMEGA32A microcontroller are based on the GEBRABUS standard and correspond to the SPI and I2C pins of other GEBRABIT modules, the GebraBit ICM20689 module can be placed pin to pin  on the GebraBit ATMEGA32A module and communicate with the GebraBit ICM20689 module via SPI or I2C by changing the state of the protocol selection jumper resistors:

I2C Connection
SPI Connection

NOTE: If you are using GebraBit microcontroller modules, note that the power selector jumpers of the GebraBit ICM20689  are set to “3V3” so that you can easily power-on the GebraBit ICM20689 module by getting the “3V3” voltage from the microcontroller module.

I2C Connection with ARDUINO UNO

First, make sure that the I2C protocol is selected by using the on-board jumpers, then follow the below steps to connect the GebraBit ICM20689 module to the ARDUINO UNO via I2C :

  • Connect the “3V3” pin of the ICM20689 module to the “3V3” output pin of the ARDUINO UNO board. (red wire)

Connect the “GND” pin of the ICM20689 module to the “GND” pin of the ARDUINO UNO board (black wire).

  • Connect the “SCL” pin of the ICM20689 module to the A5 pin of the ARDUINO UNO board (SCL). (blue wire)
  • Connect the “SDA” pin of the ICM20689 module to the A4 pin of the ARDUINO UNO board (SDA). (orange wire)

You can see how to connect the above mentioned steps in this picture:

SPI Connection with ARDUINO UNO

First, make sure the SPI protocol is selected using the on-board jumpers, then follow the below  steps to connect the GebraBit ICM20689 module to the ARDUINO UNO via SPI:

  • Connect the “3V3” pin of the ICM20689 module to the “3V3” output pin of the ARDUINO UNO board. (red wire)

Connect the “GND” pin of the ICM20689 module to the “GND” pin of the ARDUINO UNO board (black wire).

  • Connect the “SDI” pin of the ICM20689 module to the D11 pin of the ARDUINO UNO board (SDI). (yellow wire)
  • Connect the “SDO” pin of the ICM20689 module to the D12 pin of the ARDUINO UNO board (SDO). (Purple wire)
  • Connect the “SCK” pin of the ICM20689 module to the D13 pin of the ARDUINO UNO board (SCK). (Orange wire)
  • Connect the “CS” pin of the ICM20689 module to the D10 pin of the ARDUINO UNO board (SS). (blue wire)

You can see how to connect the above mentioned steps in this picture:

این مقاله را با دوستانتان به اشتراک بگذارید!

Be the first to write a review

Please help the Gebra team to improve the quality by sending comments and ratings

Your email address will not be published. Required fields are marked *

Shopping cart
Start typing to see posts you are looking for.

Sign in

No account yet?